Actions

  Print Article
  BookMark Article

Author Login    Author Login

Important
Existing members will have to use the lost password facility to get new username and new password

Welcome Guest! Please login or create an account.

Username:

Password:



If you do not have an account yet, you can register ( Here ), or you may retrieve a lost user/pass ( Here ).

Navigation    Navigation

   10 newest articles RSS

Author Highlights    Featured Author

Alice Pierce
mum

View My Bio & Articles


Ray Lopez
Tracy

View My Bio & Articles


Mira Radu Mira Radu
craiova

View My Bio & Articles


Other Websites    Websites of Interest

Inspection And Repairing Process For Leaky Roofs

Author : james smith


         


The best preventative maintenance for your roof is to perform visual inspections of the roof surface at least twice a year (Spring/Fall), and after any major storm (wind, rain, hail, snow) or construction project. This will help you to identify any potential problems that may come up. It is important to remember that traffic on your roof should be kept to a minimum as shingles are brittle, especially in extreme hot or cold temperatures. Instead of walking the roof, use a pair of binoculars to get a closer view of the roof surface. Here is what you should be checking:

Shingle Surface: Inspect the general surface of the roof. First, look for signs that the shingles may be lifting, loose or even missing. Check to make sure that the roof surface is free of all debris (leaves, garbage, twigs etc.). It is important that you do not power wash your roof! This can cause significant damage. Use a leaf blower or garden hose to remove debris. Look for mold, moss or algae – these occur more commonly in damp climates and often accumulate along the ridge or near the eaves or shaded areas of the roof. Look for exposed nails, hail marks, or missing granules (bald spots).

Flashings: Inspect all flashings around chimneys, vents, plumbing stacks, skylights, walls and valleys looking for rust, cracks, or other openings where water may enter. Look also for flashings that may have lifted from the surface of the roof. If you can see deterioration, call us right away to provide a more thorough inspection or repair.

Surrounding Vegetation: Look for areas where vegetation has grown over or is touching the roof surface. Trim back any overhanging branches. Shaded areas encourage moss and fungus growth and can encourage ice dams and run-off problems.

Building Exterior: Check your home for signs of shifting or settlement. Cracks in the structure (inside or out) are signs that there could also be cracks in the roof. Look to make sure that overhangs, soffit, fascia and downspouts are in good condition. Check your eaves-trough to make sure they are unclogged and free of debris.
Liquid roof ideally can be used for many types of roof repair. Liquid roof sticks to the entire types of facades- canvas, plywood, suds, cement, mass rubber, customized roofing, additional roof coverings, strengthen, timber, top tiles, genuine tiles, solid, and many more. It is the most cost effective and efficient product for solving RV Roof Leaks Repair problem as it does not chalk, shrink, crack, peak and flake.

Liquid Roof is a true EDPM rubber and is the only one sold in liquid form. Liquid roof makes installations easy. Liquid Roof could be described as a liquid version of the single ply EPDM membrane which has established and outstanding performance record of over 30 years. Liquid roof is the solution to all the problems in all forms of roofs. It does not leak as it is water resistant, it is not affected by weather conditions humidity, rain or extreme hot weather. If you have a liquid roof coating on your normal roof it is also a very effective solution. If in case, some damage occurs to the liquid roof then it's easy to repair as it's economical to replace any damaged areas compared to others forms of roof.

As far as application of liquid roof is concerned, it offers compatibility to a large number of surfaces such as metal, concrete, fibreglass, fabric, foam, rubber. It may be applied on roof decks, metal roofs, gutters, structural steel, air conditioner enclosures, cooling towers, galvanized steel, unit heater flues, smoke stacks and chimneys, fibreglass, non porous masonry surfaces, pool liners, underground room waterproofing, and channels. Liquid roof coatings that form the waterproofing layer of an inverted roof should not require replacement during the life of the building, provided it is fully protected from ultra-violet radiation and extreme temperature variations by a loading layer above it.


Author's Resource Box

Liquid roof
RV Roof Leaks Repair
Roof Leaks

Article Source:
Articlebliss

Tags:   Liquid Roof, Liquid Roof Coatings, RV Roof Repair, Roof Leaks, EPDM Rubber

Author RSS Feed   Author RSS Feed     Category RSS Feed   Category RSS Feed


 

  Rate This Article
Badly Written Offensive Content Spam
Bad Author Links Mis-spellings Bad Formatting
Bad Author Photo Good Article!
 

 

 

 

Submitted : 2011-09-19    Word Count : 665    Popularity:   567    Times Viewed: 84   69 or more times read