Print Article
BookMark Article

Important
Existing members will have to use the lost password facility to get new username and new password
Welcome Guest! Please login or create an account.
If you do not have an account yet, you can register ( Here ), or you may retrieve a lost user/pass ( Here ).


Adrian Jones
Michael Paglia
-
Walter Adams
Austin

Author : Martin O Flynn
Skimboarding is an enjoyable hobby that will bring you many hours of pleasure. This please is accentuated when you have the proper technique.
Please find below the top 10 skimboarding tips that will help you become more skilled at skimboarding.
1. Choosing the right skim board method. You should match your skim board method to the type of beach you skim board on. For beaches with steep slopes use ‘wave skim boarding’ whereby you skim into the waves and ride them just like you would in surfing.
When you are on a flat beech with relatively benign waves use the sand skimming method in shallow water.
2. Use the appropriate skim board You have to match your board to the skim board method you are using. This is your only contact with the water so it is essential you get the board right. The critical factor is board shape, much more so than the design or prices of the board. For sand skimming you should use a round skim board that resembles a disk in shape. For wave skimming use an oblong board similar in shape to a mini surf board.
3. Mounting the board. You should move onto the board with momentum almost as if you are funning onto the board. The board is more likely to move with you in the direction of your motion. If you were to just jump on the board, you are more likely to topple over.
4. Riding the waves. Use the ‘side slipping’ technique to get on the waves. As you are skimming over the water, turn your board side ways with your feet facing out towards the horizon. You can slow down the rate of speed loss by carefully timing the ‘trimming’. When you near the wave, turn your skim board around and ride the wave as per usual.
5. Wax your Board. By waxing your board you will increase the speed at which it travels over the water. This will decrease the friction between your board and the ocean and result in a swifter movement of your board.
6. Feet Position. Position your feet at the back of the board. This will maximize your balance and effectiveness.
7. Use Alcohol to fit traction pads on a new board. When you get a new board they tend to come in a high gloss finish. Determine the places where you want to fit traction pads and use an alcohol solution to de-gloss these areas. This will increase their ability to attach to the board giving your further peace of mind.
8. Putting traction pads back on: If the traction pads start to come off then you need to take immediate action. Apply super glue around the edges to prevent them from peeling further. You can use a hot hair dryer to remove the pads and then reattach them
9. Travelling with a skim board. Protect your board from damage by purchasing a padded travel bag. You can wrap it in a towel or other padded material to further protect it. Check out in advance the airline costs of taking your skimboards with you on holiday.
10. Skim board Safety. You should take time and do adequate stretching before you hit the water. This will increase your flexibility and make you les prone to injury. Use sun screen and sun glasses to protect yourself from damaging UV rays.
There are many excellent resources for skimboarding tips, equipment reviews, video lessons and more online.
Claim you FREE Lifetime Membership to the Skimboarding Social Network at http://www.hobeze.com. The site enables members to create a skimboarding profile and chat with fellow skim boarding fans worldwide. They can watch video tips, read articles, check out other peoples boards and share tips. Martin O Flynn is a director of Hobeze.com and a regular contributor of articles.
Article Source:
Articlebliss
Author RSS Feed
Category RSS Feed
